Kater Brand Sanitary Silicone

Kater brand Sanitary Silicone 2.Anti-fungal compounds to prevent mould growth in areas subject to high humidity

                                            Kater Brand Sanitary Silicone 

 

Property:Acid & solidified; high intensity; fast solidification; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant

Service Restriction:The product is not applicable to structure assembly or project whose base material has a surface temperature above 40.Use:1. Various interior decoration glass, aluminum alloy and glass device projects2. Various glazing projects3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line 4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material

 

Instruction:Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.Make sure fill the interface with it and tightly stick to the base material . Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material

 

Voluntary Standard: GB/T14683-2003

 

Emergent TreatmentKeep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.StorageKeep in dry place; dont unseal it before use; keep a storage temperature below 25 to prolong its service life; 12 moths guarantee.

Packing Specification: 245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products); 30ml, 60ml, 90ml, 100ml with blister card; 190kgs by drum;

   

Optional Color: Black, white, transparent, grey or on requested.

 

Testing Standard: GB/T14683-2003 Silicone Building Sealant

NO.	Item	Data
1	Type	Acetoxy
2	Density g/cm3	0.96
3	Capacity movement	±30%
4	Skinning time	5-15 minutes
5	Drying time(2mm/h)	10-12
6	Drying(4mm/h)	24-30
7	Max. Tensile strength	1.3
8	Hardness shore	20±2
9	Elongation at Break(%)	≥450
10	Modulus Mpa(100%)	0.55
11	Application temperature	-20 to +40
12	Temperature resistance	-50 to +100
13	adhesive	OK
14	Weatherproof	OK
15	Cold-hot adhesive	OK
16	Under water adhesive	OK
17	Elastic Recovery Ratio	96
18	Mass-loss Rate	40
Skin drying time and fully drying time under: 23 and 50% humidity

 

Kater Brand Sanitary Silicone