sealants and adhesives

sealants and adhesives 1.factory for big glass acetoxy silicone sealant 2.The raw material comes from Dow Corning; 3.RTV sea

                                                                            sealants and adhesives

Property:      The raw material comes from Dow Corning;

      RTV Silicone and one component; Never being soft, draw up, vulcanize under -50 to +100.

      Acid & solidified; high intensity; good tightness; weathering resistant; ultraviolet resistant; ozone resistant; water resistant; high and low temperature resistant  

 

Application:1. Various interior decoration glass, aluminum, large plate glass and sky light glass structure projects.2. Various glass assembling and bathroom glass sealing projects3. seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line 4. good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material

 

InstructionClean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.Make sure fill the interface with it and tightly stick to the base material . Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material

 

Voluntary Standard: GB/T14683-2003

 

Emergent TreatmentKeep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.StorageKeep in dry place and keep a storage temperature below 25 to prolong its service life; 12 months guarantee.

 

Packing Specification: 40ml, 90ml by alumunium tube with blister, 230ml, 280ml, 300ml, 310ml by plastic cartridge; 190 KGS by drum

 

Optional Color: Black, white, transparent, silver-grey or appointed color of clientsTesting Standard: GB/T14683-2003 Silicone Building Sealant

 

NO.	Item	Data
1	Type	Acetoxy
2	Density g/cm3	1.0
3	Capacity movement	±30%
4	Skinning time	5-10 minutes
5	Drying time(2mm/h)	6-8
6	Drying(4mm/h)	10-13
7	Max. Tensile strength	1.5
8	Hardness shore	22±2
9	Elongation at Break(%)	≥600
10	Modulus Mpa(100%)	0.65
11	Application temperature	-20 to +40
12	Temperature resistance	-50 to +100
13	adhesive	OK
14	Weatherproof	OK
15	Cold-hot adhesive	OK
16	Under water adhesive	OK
17	Elastic Recovery Ratio	96
18	Mass-loss Rate	15
Skin drying time and fully drying time under: 23 and 50% humidity

 

sealants and adhesives